| |
|
|
|
|
|
| Securitron Pushbuttons |
 |
| |
|
Securitron manufacturers a wide variety of exit pushbuttons for security applications. The series features mounting on brushed stainless steel plates and includes an exit prompt instruction for each model. Hookup is from colored flying leads or labeled screw terminals. These exit buttons are attractive, rugged, reliable and suitable for installation anywhere. The most common application is momentary or timed release of an electric lock. This may be accomplished by direct hookup or by signaling the Request to Exit (REX) input of an access control system. Note that depending on the door and locality, it may require the use of an exit device that will release the lock with one motion, such as Securitron's Touch Sense Bar. Check with the local building or fire department.
PB 7 Amp DPST Pushbutton Switch
PBA 7 Amp DPST Pushbutton Switch
"Top of the Line" The model PB features an in-dustrial grade 1- 1/2” mushroom button with 7 Amp DPST (NO/ NC) contacts. It is waterproof (NEMA4) and in-cludes 12-24 VDC bi-color illumination. The button itself illuminates green from a multi-chip LED and there is also a super-bright red LED . Momentary or alternate (Model PBA) contacts may be chosen and the switch is UL Listed. The model PB is available on single gang plates only and is delivered with an indoor backbox.
|
30 Second Relock
Securitron integrates a 30 second timer function into two existing button designs. The model PB2E becomes the model EEB2 for single gang applications, and the model PB3E be-comes the model EEB3N for narrow stile mounting. Combine either of these buttons with an XMS for dual failsafe operation.
Required for NFPA 101 Access Controlled Egress Doors
|
|
|
|
PB2 10Amp SPDT w/ LED
PB2E 10Amp SPDT
EEB2 30 Second Time Delay |
|
PB2EH 10 Amp SPDT Pushbutton |
| Large and Tough The model PB2 features a large (2” Diagonal) flush button, which is illuminated by a 25,000 hr. 12/24 VDC incandescent bulb. It includes a super-bright red LED and is available with momentary operation on a single gang plate only. It has SPDT 10 Amp contacts and is delivered with a backbox. More economical is the PB2E, which is a non-illuminated ver-sion (backbox not furnished). For ADA compliant systems, a version with handicapped symbol is available (PB2H and PB2EH). |
|
|
|
|
|
PB3 3Amp DPST w/ LED
PB3A 3Amp AA DPST w/ LED |
|
|
|
| MODEL PB3 Smallest Size and the Most Options The PB3 is a com-pact (1” x 1-3/4”) push button which is also short in length so it can be supplied on a narrow stile plate (Model PB3N) and installed directly on aluminum glass door frames. The PB3 switch has 3 Amp, DPST, UL listed contacts and it can be converted to DPDT in the field. A backbox is supplied on single gang versions and 12-24 VDC bi-color illumination is standard. An alternate action version (Model PB3A) is available, as well as a non-illuminated version (Model PB3E). A sur-face mount version is available (PB3ER), which is perfect for mounting under a desk. pole contacts. |
|
|
|
|
PB4 4Amp SPST w/LED
PB4A 4Amp AA SPST w /LED
PB4-2 4Amp DPDT w/LED
PB4A-2 4Amp AA DPDT w/ LED |
PB4N 4Amp SPST w/ LED
PB4EA 4Amp AA SPDT w/ LED
PB4N-2 4Amp DPDT w/ LED
PB4EA-2 4Amp AA DPDT w/ LED |
PB5 10Amp DPDT Illuminated
PB5E 10Amp DPDT |
| The PB4 incorporates an all-steel button, which has been specifically designed to resist severe attacks such as hammer blows. SPDT contacts are rated at 4 Amps and a bi-color (red/green) LED is standard. Momentary or alternate (Model PB4A) contacts may be selected and the unit is available on a single gang narrow stile (Model PB4N) stainless steel plate. The single gang version is delivered complete with an indoor backbox and finally, DPDT contacts may be specified (Model PB4-2). |
A final choice is the PB5 and PB5E (non illumi-nated version). This unit features a 2" round button operator in red which is required in some areas. The PB5 series also has a double pole contacts. |
|
|
|
|
|
Contact Us | Privacy Policy
© 2007 JLM Wholesale |
