Schlage Locknetics Power Supplies - JLM Wholesale, Door Hardware, Access Control and Security Hardware- Strikes, Locks and Security Hardware Solutions for Michigan and the World.

Product Find

	Browse Listings:
	Search:

	Limit Search:

The 505 model provides 1 amp output at 12 or 24VDC. Output voltage is field selectable by movable jumpers. It is UL Listed, Filtered and regulated, with a built in battery charging circuit. Note: Modular options are not available for the 505 series.

The 510 model provides 3 amps output at 12 or 2 amps output at 24VDC. Output voltage is field selectable by a slide switch. It is UL Listed, Filtered and regulated, with a built in battery charging circuit. The 510 features a modular design which can accommodate various expansion modules such as the DCM dual control module.

The 515-12 model provides 10 amps output at 12VDC. It is UL Listed, Filtered and regulated, with a built in battery charging circuit. The 515 features a modular design which can accommodate various expansion modules such as the DCM dual control module.

The 515-24 model provides 5 amps output at 24VDC. It is UL Listed, Filtered and regulated, with a built in battery charging circuit. The 515 features a modular design which can accommodate various expansion modules such as the DCM dual control module.

510-515 Modular Options:

The EIR is a plug in relay allowing interfacing of the locking system with an approved fire annunciation system. This is a code requirement for NFPA and BOCA building codes. This allows the door to unlock at the initiation of a fire alarm.

The SBP Option provide either one or two 4Ah. 12Vdc gelcell batteries. These provide the backup power in the event of a power outag

510 Option chart
# of DCM's	# of Zones	CMR's Required	TDM	EIR
0	1	0	0	0 or 1
1	2	0	up to 2	0 or 1
2	4	1	up to 4	0 or 1
3	6	1	up to 6	0 or 1
515 Option chart
0	1	0	0	0 or 1
1	2	0	up to 2	0 or 1
2	4	0	up to 4	0 or 1
3	6	1	up to 6	0 or 1
4	8	1	up to 8	0 or 1
5	10	2	up to 10	0 or 1
6	12	2	up to 12	0 or 1

The DCM module is a plug in PC card that offers two individual "zones" to operate virtually any type of locking mechanism. Each zone features a N.C. Input, wet output, and a SPDT dry contact. You may reverse the N.C. Input and use it as N.O. Input but the TDM option (if supplied) will not operate.

The CMR is a control module rack mount bracket. It is fastened to the powersupply back plane and then DCM modules are simply slid into one of the three available slots to provide up to 6 zones per CMR rack.

The KLC option is simply a key lock for the cover on the power supply. It can be used on nay of the 505,510,515 or SBE enclosures.

The TDM option mounts on the DCM board providing and adjustable 0-30 second time delay on the re-lock of the zone. Pleas note: the can only be used with N.C. Actuation devices.

The SBE is a separate "stand by battery enclosure" designed to allow easy connection of up to 8 SBP12's or 4 SBP24's.