Complies with NFPA101 5-2.1.6.2
Access Controlled Egress Doors

The 692 SmartBar is an electronic switching device with
no moving parts, which serves as a non-latching request
to exit bar at an egress door. It allows one motion egress
at doors equipped with electromagnetic or electronic
locks, with “no prior knowledge” required by the user.
Touching the Smartbar at any point on the bar activates
internal circuitry which controls power to the locking
device. No moving parts results in low maintenance and
long life.
The 692 SmartBar provides two directionally opposed
infrared detection circuits to sense an exit request. As a
person touches the bar the light beam is broken. The
patent pending redundant system provides a high level of
life safety and peace of mind to the end user.
An audible alarm is standard. This feature provides a
security alarm to alert when there is a prolonged
unlocked condition caused by a continued break in
the light beam. This feature is desirable in applications
requiring monitoring of security conditions or
delayed egress.

• Optional Lighted “Push to Exit”
• Dual infrared detection circuits – patent pending
• No Moving Parts - One Motion Egress
• Audible alarm standard, alerts prolonged
unlock condition
• DPDT relay standard - signals access control panel
or auxiliary device

Sizes: 36", 42" or 48" lengths.

Finishes: 628 satin anodized aluminum or 313 dark satin bronze anodized aluminum.

BRG Pushpad: Optional lighted upgrade with PUSH TO EXIT signage, when electromagnetic lock is in the locked state the PUSH TO EXIT sign is lit red. When unlocked the light signage changes to an EXIT sign, lit green.